topic Re: Secure ACS 3.1 browser connections with https in Network Access Control

Secure ACS 3.1 browser connections with https

matt.austin — Sun, 10 Mar 2019 14:21:28 GMT

My question has to do with making secure connections to the ACS web interface. I remember thinking I read some time ago that you can set the page up for https:// using MS IIS? I have read info. on the UCP utility and configuring it to be secure, but I haven't found new info. to ensure that the whole web interface is secure. If anyone has any tips or links to helpful information, please let me know.

Thanks!

Re: Secure ACS 3.1 browser connections with https

sghosh — Mon, 16 Jun 2003 17:22:00 GMT

Hi Matt,

Please find below a procedure to enable https for browsing the ACs server,

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs31/acsuser/s.htm#4957

Thanks

Sujit

Re: Secure ACS 3.1 browser connections with https

matt.austin — Mon, 16 Jun 2003 17:28:00 GMT

Thanks Sujit,

I will be sure to give it a shot with the recommendations from the website. Have a Great Day!!!

-Matt

Re: Secure ACS 3.1 browser connections with https

ywadhavk — Tue, 17 Jun 2003 03:32:41 GMT

Hi Matt,

You might want to consider upgrading the ACS to 3.2(001.013) if you also need to have the username encrypted. On 3.1, though the password is encrypted, the username isn't.

Thanks,

yatin

Re: Secure ACS 3.1 browser connections with https

matt.austin — Tue, 17 Jun 2003 09:51:57 GMT

Hi Yatin,

Thanks for your suggestion. I remember reading that also, prior to our install of ACS 3.1. I will look into it.

Cheers,

Matt