topic Privilege Level authentication in Network Access Control

Privilege Level authentication

abbas.ali — Sun, 10 Mar 2019 14:18:29 GMT

There are 15 levels of privilege. Is there any list to find out what level provides what right? I looked into CCO, but no specific thing.

Thanks

Re: Privilege Level authentication

kthanuva — Mon, 19 May 2003 07:04:56 GMT

Hi Abbas,

The privilege commands depends on the IOS versions.And the list of commands is a huge one.Better u can use ? and see for each privilege.

This Privilege option is used mainly for restrict the access of commands

please find the below link

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_command_reference_chapter09186a00800d980c.html#1027108

Regards

Kiruba

Re: Privilege Level authentication

mhoda — Tue, 20 May 2003 02:23:42 GMT

Hello Abbas,

Actually there are 3 default levels of privilege on the router: 0, 1 & 15. Level 2-14 are user defined. Level 2-14 inherits all the level 0 & 1 commands.

Level 15: all commands are allowed

Level 1: all the user mode command

Level 0: only 5 commands: disable, enable, exit, help, and logout

Here is the link that has explaination of this:

http://www.cisco.com/warp/public/480/PRIV.html

If you want to know how to assign level 15 commands to level 2-14 locally on the router, you can refer to my explaination on this post:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.ee97017

I hope it helps ! Thanks,

Mynul