topic Login message in Network Access Control https://community.cisco.com/t5/network-access-control/login-message/m-p/203157#M438198 <P>How can I define a default login message for users authenticating using CiscoSecure ACS for Windows.... I would like to display a message when a user authicates to a switch or a router.</P> Sun, 10 Mar 2019 14:16:42 GMT brajar01 2019-03-10T14:16:42Z Login message https://community.cisco.com/t5/network-access-control/login-message/m-p/203157#M438198 <P>How can I define a default login message for users authenticating using CiscoSecure ACS for Windows.... I would like to display a message when a user authicates to a switch or a router.</P> Sun, 10 Mar 2019 14:16:42 GMT https://community.cisco.com/t5/network-access-control/login-message/m-p/203157#M438198 brajar01 2019-03-10T14:16:42Z Re: Login message https://community.cisco.com/t5/network-access-control/login-message/m-p/203158#M438199 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>You need to put that message using AAA commands in the routers and not in the ACS server.</P><P>You can use the following command in IOS.</P><P></P><P>aaa authentication banner</P><P></P><P>Thanks</P><P>Sujit</P><P></P></BODY></HTML> Thu, 01 May 2003 18:10:50 GMT https://community.cisco.com/t5/network-access-control/login-message/m-p/203158#M438199 sghosh 2003-05-01T18:10:50Z Re: Login message https://community.cisco.com/t5/network-access-control/login-message/m-p/203159#M438200 <HTML><HEAD></HEAD><BODY><P>I have added SSH to my routers and now the banner does not work. Is there some trick to get it to work or not supported at this time.</P></BODY></HTML> Mon, 19 May 2003 13:33:23 GMT https://community.cisco.com/t5/network-access-control/login-message/m-p/203159#M438200 rklinkhammer 2003-05-19T13:33:23Z