topic Can't activate radius or tacacs+ on Cisco 801 in Network Access Control https://community.cisco.com/t5/network-access-control/can-t-activate-radius-or-tacacs-on-cisco-801/m-p/192489#M438540 <P></P><P>Hello,</P><P></P><P>I have some Cisco 801 with IOS:</P><P></P><P> - C800-Y6-MW.121-3.XG4</P><P> - C800-G3-MW.120-3.T1</P><P></P><P>when configuring them, after issuing -aaa new model-,</P><P></P><P>the command -aaa authentication login default ?- shows you:</P><P> enable</P><P> line</P><P> local</P><P> local-case</P><P> none</P><P></P><P>but not the options radius neither tacacs+.</P><P></P><P>I haven't found any but related with this issue.</P><P></P><P></P><P>P.D. In a Cisco 803 with a 12.1(2)T it works perfectly</P> Sun, 10 Mar 2019 14:05:03 GMT jadroer 2019-03-10T14:05:03Z Can't activate radius or tacacs+ on Cisco 801 https://community.cisco.com/t5/network-access-control/can-t-activate-radius-or-tacacs-on-cisco-801/m-p/192489#M438540 <P></P><P>Hello,</P><P></P><P>I have some Cisco 801 with IOS:</P><P></P><P> - C800-Y6-MW.121-3.XG4</P><P> - C800-G3-MW.120-3.T1</P><P></P><P>when configuring them, after issuing -aaa new model-,</P><P></P><P>the command -aaa authentication login default ?- shows you:</P><P> enable</P><P> line</P><P> local</P><P> local-case</P><P> none</P><P></P><P>but not the options radius neither tacacs+.</P><P></P><P>I haven't found any but related with this issue.</P><P></P><P></P><P>P.D. In a Cisco 803 with a 12.1(2)T it works perfectly</P> Sun, 10 Mar 2019 14:05:03 GMT https://community.cisco.com/t5/network-access-control/can-t-activate-radius-or-tacacs-on-cisco-801/m-p/192489#M438540 jadroer 2019-03-10T14:05:03Z Re: Can't activate radius or tacacs+ on Cisco 801 https://community.cisco.com/t5/network-access-control/can-t-activate-radius-or-tacacs-on-cisco-801/m-p/192490#M438544 <HTML><HEAD></HEAD><BODY><P>The Feature Navigator (<A class="jive-link-custom" href="http://www.cisco.com/cgi-bin/Support/FeatureNav/FN.pl" target="_blank">http://www.cisco.com/cgi-bin/Support/FeatureNav/FN.pl</A>) shows that TACACS wasn't supported in the 801 series until 12.1(2)T at the earliest. No 12.0 code has this feature in it.</P><P></P><P>Similar with Radius support.</P></BODY></HTML> Sat, 21 Dec 2002 02:11:46 GMT https://community.cisco.com/t5/network-access-control/can-t-activate-radius-or-tacacs-on-cisco-801/m-p/192490#M438544 gfullage 2002-12-21T02:11:46Z