topic Re: AAA config with PDM in PIX in Network Access Control https://community.cisco.com/t5/network-access-control/aaa-config-with-pdm-in-pix/m-p/112552#M439213 <HTML><HEAD></HEAD><BODY><P>I don't think you can set the user to use the enable password for telneting through PDM, but you can set a username and password locally. When the Tacacs+ server is not available he can use the local username and password.</P><P></P><P>aaa-server TACACS+ protocol tacacs+ </P><P>aaa-server LOCAL protocol local </P></BODY></HTML> Tue, 06 May 2003 14:09:31 GMT hadbou 2003-05-06T14:09:31Z AAA config with PDM in PIX https://community.cisco.com/t5/network-access-control/aaa-config-with-pdm-in-pix/m-p/112551#M439212 <P>I am trying to configure a PIX through PDM 3.0(0)148. I want to configure tacacs+ authentication and if the server is not found, let the users enter with the "enable" password.</P><P></P><P>Does anyone know how to do it or something similar?</P><P></P><P>TIA</P> Sun, 10 Mar 2019 14:16:51 GMT https://community.cisco.com/t5/network-access-control/aaa-config-with-pdm-in-pix/m-p/112551#M439212 venancio.martinez 2019-03-10T14:16:51Z Re: AAA config with PDM in PIX https://community.cisco.com/t5/network-access-control/aaa-config-with-pdm-in-pix/m-p/112552#M439213 <HTML><HEAD></HEAD><BODY><P>I don't think you can set the user to use the enable password for telneting through PDM, but you can set a username and password locally. When the Tacacs+ server is not available he can use the local username and password.</P><P></P><P>aaa-server TACACS+ protocol tacacs+ </P><P>aaa-server LOCAL protocol local </P></BODY></HTML> Tue, 06 May 2003 14:09:31 GMT https://community.cisco.com/t5/network-access-control/aaa-config-with-pdm-in-pix/m-p/112552#M439213 hadbou 2003-05-06T14:09:31Z