topic Re: Microsoft NT4 RADIUS (IAS) & callback in Network Access Control

Microsoft NT4 RADIUS (IAS) & callback

skra — Sun, 10 Mar 2019 14:09:41 GMT

Dear all,

I have already configured a 3660 router for users to dialin.

I use for aaa the microsoft radius (NT4) that is currently installed on the Primary domain controler (PDC).

The authentication is working properly for users of the domain that trying to dialin. The problem is located to those users that try to callback.

Can you help me with the radius attributes regarding this issue?

Regards

Spyros Kranis

MSc,CCNP

tepatel — Mon, 24 Feb 2003 21:31:13 GMT

You need to configure cisco av-pairs for that.

Here is the url which will help you to know what Av-Pairs required.

Cisco-AVPair = "lcp:callback-dialstring=numver-to-be calledback",

Cisco-AVPair = "lcp:send-secret=cisco"

Above link also has a debug information so if it still doesn't work, pl enable those debug and post it here.

skra — Tue, 25 Feb 2003 13:09:29 GMT

I have already configure

Cisco-AVPair = "lcp:callback-dialstring=numver-to-be calledback",

but not the next one.

I will try it and let you know

Also I would like the number-to-be-calledback to be issued by the user dynamically.

Regards

Spyros Kranis