topic Re: ACS 3.02 and Multiple NAS IP Addresses Not working. in Network Access Control https://community.cisco.com/t5/network-access-control/acs-3-02-and-multiple-nas-ip-addresses-not-working/m-p/135404#M439370 <HTML><HEAD></HEAD><BODY><P>I found my problem.</P><P></P><P>FYI...when you are using a CSDBSync, you need to make sure you have the correct type of carriage return. Once I corrected the carriage return problem my issues were fixed.</P></BODY></HTML> Tue, 07 Jan 2003 22:41:43 GMT sousjp 2003-01-07T22:41:43Z ACS 3.02 and Multiple NAS IP Addresses Not working. https://community.cisco.com/t5/network-access-control/acs-3-02-and-multiple-nas-ip-addresses-not-working/m-p/135403#M439369 <P>I have about 390 AAA Clients (cisco devices) in a Network Device Group. They all have multiple IP addresses. The AAA Clients were all entered with a carriage return in between addresses (with CSDBSync)</P><P></P><P>When trying to login to a router from any address other than the first address listed in ACS, the attempt fails with the error "Unkown NAS".</P><P></P><P>Also, if I create a "TACACS+ Default" AAA Client (*.*.*.*) I am able to login to any address on that device.</P> Sun, 10 Mar 2019 14:05:56 GMT https://community.cisco.com/t5/network-access-control/acs-3-02-and-multiple-nas-ip-addresses-not-working/m-p/135403#M439369 sousjp 2019-03-10T14:05:56Z Re: ACS 3.02 and Multiple NAS IP Addresses Not working. https://community.cisco.com/t5/network-access-control/acs-3-02-and-multiple-nas-ip-addresses-not-working/m-p/135404#M439370 <HTML><HEAD></HEAD><BODY><P>I found my problem.</P><P></P><P>FYI...when you are using a CSDBSync, you need to make sure you have the correct type of carriage return. Once I corrected the carriage return problem my issues were fixed.</P></BODY></HTML> Tue, 07 Jan 2003 22:41:43 GMT https://community.cisco.com/t5/network-access-control/acs-3-02-and-multiple-nas-ip-addresses-not-working/m-p/135404#M439370 sousjp 2003-01-07T22:41:43Z