topic ACS GUI login failed in Network Access Control

ACS GUI login failed

Ferric — Sun, 26 Jan 2020 15:25:17 GMT

I can however login SSH with the same credentials with no problem.

auacs1/admin# show application status acs

ACS role: PRIMARY

Process 'database' running
Process 'management' running
Process 'runtime' running
Process 'adclient' running
Process 'view-database' running
Process 'view-jobmanager' running
Process 'view-alertmanager' running
Process 'view-collector' running
Process 'view-logprocessor' running

Can someone assist me with this?

Re: ACS GUI login failed

Muhammad Awais Khan — Sun, 26 Jan 2020 16:23:12 GMT

Hi,

You can reset the gui admin 'acsadmin' from cli using below command since you already have access to cli:

acs reset-password

This command resets the ACS administrator ‘acsadmin’ password to the default setting ( default ). Resetting this password does not affect other ACS administrators.

Reference:https://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-4/command/reference/cli/cli_app_a.html#85117

Re: ACS GUI login failed

Ferric — Sun, 26 Jan 2020 16:52:25 GMT

Thanks!

I figured out the GUI "ACSAdmin" was set with the SSH "admin" password