topic Re: Pxgrid with DNAC - is Plus license required? in Network Access Control

Pxgrid with DNAC - is Plus license required?

cakwok — Fri, 13 Mar 2020 23:03:08 GMT

According to the latest ISE ordering guide https://www.cisco.com/c/dam/en/us/products/collateral/security/identity-services-engine/guide_c07-656177.pdf, Plus license is not required if user and endpoint contextual attribute is exchanged -

"User and endpoint contextual attribute (w ho, w hat, w here, w hen, etc.) data exchange betw een Cisco ISE and thirdparty system through pxGrid"

Does the pxgrid connection between ISE and DNAC fall into this scenario?

Re: Pxgrid with DNAC - is Plus license required?

Timothy Abbott — Wed, 18 Dec 2019 16:57:51 GMT

Cisco DNAC uses context sharing which requires a 1:1 Plus license to be installed in ISE. Sorry if that wasn't clear in the guide.

Regards,
-Tim

Re: Pxgrid with DNAC - is Plus license required?

Mohammed al Baqari — Sat, 14 Mar 2020 10:33:01 GMT

Hi,

ISE doesn't need specific license for pxgrid. ISE license is based on
required features in ISE.

But for rich context information, you will need at least plus license
(mainly for profiling information).

***** please remember to rate useful posts