topic Re: BYOD no software install? in Network Access Control

BYOD no software install?

Dustin Anderson — Thu, 09 Jan 2020 19:06:52 GMT

So, we are looking at changing our BYOD over to ISE. We want clients to just need to register, and not load anything on their devices. I was able to get this to work on phones by not having a client provisioning policy to hit. I have to have PC policies to load AnyConnect on company laptops. I did try to add a rule to exclude the BYOD from hitting these, but then got an error on the client of no profile found and couldn't register.

Basically I want them to connect, register, and be good. No NAC download/install.

Actually, on a side note, I get the error on phones now. I originally tested in 2.3, and now are on 2.6, so may be a change in versions. Registration does not continue without a profile

Re: BYOD no software install?

Dustin Anderson — Thu, 09 Jan 2020 19:26:37 GMT

Found my own answer.

Under work centers>BYOD>Settings.

I had to set Native Supplicant Provisioning Policy Unavailable to allow access vs use default.

Re: BYOD no software install?

Jason Kunst — Thu, 09 Jan 2020 22:25:58 GMT

@Dustin Anderson wrote:

Found my own answer.

Under work centers>BYOD>Settings.

I had to set Native Supplicant Provisioning Policy Unavailable to allow access vs use default.

Check http://cs.co/ise-byod other info, ISE BYOD Registration only