topic posture redemption timer in Network Access Control

posture redemption timer

nikhilcherian — Fri, 21 Feb 2020 19:04:35 GMT

Hi All,

Can I make the redemption timer to 0, so that the moment the posture validation is failed, the client will be moved to non-compliant state

Thanks

Nikhil

Mike.Cifelli — Mon, 15 Apr 2019 13:08:03 GMT

To my knowledge the default is set to 4 minutes, and the lowest you can configure is 1 minute. HTH!

Timothy Abbott — Mon, 15 Apr 2019 14:58:58 GMT

Mike is correct here. The valid range for the posture remediation timer is 1 to 300 minutes.

Regards,

-Tim