Setting up ISE 2.4 for WLAN Radius Server

jonathanw84 — Mon, 10 Feb 2020 19:33:11 GMT

Hello,

We currently use ACS for RADIUS to authenticate users when connecting to a specific WLAN. We want to migrate this into our existing ISE 2.4 environment, but I am having a difficult time understanding the flow of how this works. Thus far, here is what I have done:

1. ISE PN has been added as a RADIUS server on the WLC and assigned to the WLAN.

2. The WLC has been added into ISE.

3. ISE is already connected with AD.

What I am looking to do is create a policy that authenticates users connecting to SSID1 through Active Directory, validating their user name and that they are part of the SSID1 AD group. If authentication is verified, we want to allow access on the SSID. Nothing else.

What is the best way to go about this? I'm a novice when in comes to ISE and the way it is laid out is very confusing for me.

Thanks!

Re: Setting up ISE 2.4 for WLAN Radius Server

Greg Gibbs — Mon, 10 Feb 2020 22:29:02 GMT

Explaining the fundamentals of ISE is difficult at best in this type of forum. If you have not already done so, I would suggest reviewing the ISE Training Videos.

You can also find example demonstrations on external sites like Lab Minutes.

Cheers,

Greg

topic Re: Setting up ISE 2.4 for WLAN Radius Server in Network Access Control

Setting up ISE 2.4 for WLAN Radius Server

Re: Setting up ISE 2.4 for WLAN Radius Server