https://community.cisco.com/t5/network-access-control/window-7-10-posture-assessment-time-require/m-p/4001356#M454904 <P>That number is inline with all of the deployments I have done for clients.&nbsp; The time it takes really depends on a number of factors such as network latency and how busy the client PCs are.&nbsp; During an initial boot, connect, and then posture, there will still be applications loading and could delay it more than if you were already logged in to the PC and plugging it into the wired port.</P> Thu, 19 Dec 2019 15:03:01 GMT Colby LeMaire 2019-12-19T15:03:01Z https://community.cisco.com/t5/network-access-control/window-7-10-posture-assessment-time-require/m-p/4001114#M454903 <P>Hi all,</P><P>ISE 2.6p3 Anyconnect 4.7</P><P>&nbsp;</P><P>generally testing on win7, win 10 whole posture process took 40 second or more,(AV Inst, AV Deft, Win Update Enable, App Vis)</P><P>&nbsp;</P><P>Is the time is acceptable? can share with me yours other experience how long time posture process taken on other environment?&nbsp;</P> Thu, 19 Dec 2019 08:22:48 GMT https://community.cisco.com/t5/network-access-control/window-7-10-posture-assessment-time-require/m-p/4001114#M454903 Freemen 2019-12-19T08:22:48Z https://community.cisco.com/t5/network-access-control/window-7-10-posture-assessment-time-require/m-p/4001356#M454904 <P>That number is inline with all of the deployments I have done for clients.&nbsp; The time it takes really depends on a number of factors such as network latency and how busy the client PCs are.&nbsp; During an initial boot, connect, and then posture, there will still be applications loading and could delay it more than if you were already logged in to the PC and plugging it into the wired port.</P> Thu, 19 Dec 2019 15:03:01 GMT https://community.cisco.com/t5/network-access-control/window-7-10-posture-assessment-time-require/m-p/4001356#M454904 Colby LeMaire 2019-12-19T15:03:01Z