https://community.cisco.com/t5/network-access-control/ise-posturing-with-anyconnect-communication/m-p/3952912#M455953 <P>Good day everyone.</P><P>&nbsp;</P><P>Anyone know the best way to let users know how posturing works and how to guide them through when they first log in?</P> Mon, 04 Nov 2019 19:55:33 GMT NeoK 2019-11-04T19:55:33Z https://community.cisco.com/t5/network-access-control/ise-posturing-with-anyconnect-communication/m-p/3952912#M455953 <P>Good day everyone.</P><P>&nbsp;</P><P>Anyone know the best way to let users know how posturing works and how to guide them through when they first log in?</P> Mon, 04 Nov 2019 19:55:33 GMT https://community.cisco.com/t5/network-access-control/ise-posturing-with-anyconnect-communication/m-p/3952912#M455953 NeoK 2019-11-04T19:55:33Z https://community.cisco.com/t5/network-access-control/ise-posturing-with-anyconnect-communication/m-p/3954072#M455955 <P>Below are my suggestions:</P> <UL> <LI>Perform a lab test whenever changing any posture policy rules</LI> <LI>Minimize user interactions as much as possible.</LI> <LI>Whenever user interactions required, there needs good and clear messages.</LI> <LI>Roll it out in small batches and get feedbacks.</LI> </UL> Wed, 06 Nov 2019 15:19:24 GMT https://community.cisco.com/t5/network-access-control/ise-posturing-with-anyconnect-communication/m-p/3954072#M455955 hslai 2019-11-06T15:19:24Z https://community.cisco.com/t5/network-access-control/ise-posturing-with-anyconnect-communication/m-p/3956730#M455971 <P>Thank you.</P> Mon, 11 Nov 2019 16:20:03 GMT https://community.cisco.com/t5/network-access-control/ise-posturing-with-anyconnect-communication/m-p/3956730#M455971 NeoK 2019-11-11T16:20:03Z