topic Re: ISE 2.4 Compatibility Matrix for cat3k in Network Access Control

ISE 2.4 Compatibility Matrix for cat3k

danigom2 — Fri, 18 Oct 2019 19:58:16 GMT

Hi,

I was wondering how I would figure out if all ISE 2.4 features in code version 15.0.2-SE11 on multiple cat3k platforms are supported. I have followed the release notes of and matrix, and while this code version falls in-between the minimum and the recommended there is no absolute confirmation that this code version supports all features.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_2_se/release/notes/OL25302.html

https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/compatibility/b_ise_sdt_24.html

Thank you

Re: ISE 2.4 Compatibility Matrix for cat3k

Jason Kunst — Mon, 21 Oct 2019 09:47:38 GMT

Please see
https://community.cisco.com/t5/security-documents/does-ise-support-my-network-access-device/ta-p/3650231

Re: ISE 2.4 Compatibility Matrix for cat3k

Jason Kunst — Mon, 21 Oct 2019 09:48:58 GMT

you can also check with switching community on specific requirements and questions