https://community.cisco.com/t5/network-access-control/parameter-map-type-webauth-activate-802-1x-and-no-parameter-map/m-p/3937959#M456582 i'd recommend posting this to the switching community as well Wed, 09 Oct 2019 14:42:00 GMT Jason Kunst 2019-10-09T14:42:00Z https://community.cisco.com/t5/network-access-control/parameter-map-type-webauth-activate-802-1x-and-no-parameter-map/m-p/3937749#M456580 <P>#parameter-map type webauth activate-802.1</P><P>This operation will permanently convert all relevant authentication commands to their CPL control-policy equivalents. As this conversion is irreversible and will disable the conversion CLI 'authentication display [legacy|new-style]', you are strongly advised to back up your current configuration before proceeding.<BR />Do you wish to continue? [yes]:</P><P>yes</P><P>#no parameter-map type webauth activate-802.1x</P><P>Will this command change any of my existing switch config or posses any risk to existing config?&nbsp;</P><P>&nbsp;</P> Wed, 09 Oct 2019 09:38:11 GMT https://community.cisco.com/t5/network-access-control/parameter-map-type-webauth-activate-802-1x-and-no-parameter-map/m-p/3937749#M456580 getaway51 2019-10-09T09:38:11Z https://community.cisco.com/t5/network-access-control/parameter-map-type-webauth-activate-802-1x-and-no-parameter-map/m-p/3937959#M456582 i'd recommend posting this to the switching community as well Wed, 09 Oct 2019 14:42:00 GMT https://community.cisco.com/t5/network-access-control/parameter-map-type-webauth-activate-802-1x-and-no-parameter-map/m-p/3937959#M456582 Jason Kunst 2019-10-09T14:42:00Z