topic Re: ISE assinging a wired user to specific QOS priority or marking its traffic in Network Access Control

ISE assinging a wired user to specific QOS priority or marking its traffic

antigles — Tue, 30 Jul 2019 13:52:14 GMT

Hi,
Is there a way to dynamically set the QOS per user on a Cisco switch?
Dynamically assigning a VLAN and inheriting QOS settings from the VLAN is not aceptable. In my scenario it must be related to the user´s traffic or to the port where the user connects and all dynamic.

Thanks!

Re: ISE assinging a wired user to specific QOS priority or marking its traffic

Nidhi — Tue, 30 Jul 2019 16:19:29 GMT

This capability is not available in ISE .

probably a switching query. But I did find a document describing this use case - https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_radcfg/configuration/xe-16-5/sec-usr-radcfg-xe-16-5-book/sec-qos-aaa-pol-name.html