https://community.cisco.com/t5/network-access-control/ise-delivering-wrong-group/m-p/3865491#M472549 <P>I have an ASA 5510 I'm testing. I have set up DHCP for two scopes. I always get the scope for the Default Group.</P><P>In reviewing today (logs from ASA), it looks like the ISE Radius server is delivering the default group rather than the test user's group as defined on the ISE (2.4).</P><P>Anyone see anything like this?</P> Thu, 30 May 2019 22:51:05 GMT joseph.williams@atos.net 2019-05-30T22:51:05Z https://community.cisco.com/t5/network-access-control/ise-delivering-wrong-group/m-p/3865491#M472549 <P>I have an ASA 5510 I'm testing. I have set up DHCP for two scopes. I always get the scope for the Default Group.</P><P>In reviewing today (logs from ASA), it looks like the ISE Radius server is delivering the default group rather than the test user's group as defined on the ISE (2.4).</P><P>Anyone see anything like this?</P> Thu, 30 May 2019 22:51:05 GMT https://community.cisco.com/t5/network-access-control/ise-delivering-wrong-group/m-p/3865491#M472549 joseph.williams@atos.net 2019-05-30T22:51:05Z https://community.cisco.com/t5/network-access-control/ise-delivering-wrong-group/m-p/3865549#M472551 Hi<BR /><BR />Can you share the configuration (screenshots) of your ise policy and the output of your ise log when user connects?<BR /> Fri, 31 May 2019 04:02:51 GMT https://community.cisco.com/t5/network-access-control/ise-delivering-wrong-group/m-p/3865549#M472551 Francesco Molino 2019-05-31T04:02:51Z https://community.cisco.com/t5/network-access-control/ise-delivering-wrong-group/m-p/3865936#M472553 Fri, 31 May 2019 19:34:45 GMT https://community.cisco.com/t5/network-access-control/ise-delivering-wrong-group/m-p/3865936#M472553 joseph.williams@atos.net 2019-05-31T19:34:45Z