Clarification on support for Ether switch modules

Avinash N. — Mon, 27 May 2019 05:23:34 GMT

Hi Folks,

I have a quick query on compatibility for Etherswitch modules for the ISR. The specific modules I am interested in are

Cisco SM-X Layer 2/3 EtherSwitch Service Module

Cisco NM EX24ES1GE

Cisco SM-ES2-24-P

I checked for these PIDs and these seem to be switch modules on routers. I checked the ISE compatibility documentation for 2.4 and I see only SM-X for the ISR and the version supported is 3.11 which means the support is on the ISR and not the module. Could I get some confirmation on whether the NAD feature will be performed by the host device or this module or if the above Etherswitches are supported?

Thanks

Avinash

Cisco Singapore

Re: Clarification on support for Ether switch modules

Jason Kunst — Tue, 28 May 2019 22:03:20 GMT

Please see this

https://community.cisco.com/t5/security-documents/does-ise-support-my-network-access-device/ta-p/3650231

topic Clarification on support for Ether switch modules in Network Access Control

Clarification on support for Ether switch modules

Re: Clarification on support for Ether switch modules