topic Re: TrustSec in Network Access Control

TrustSec

syed.mahfuzur — Sat, 25 May 2019 21:05:46 GMT

Hi;

I have configure ISE TrustSec with IOL Switch image. After showing error on ISE, below is the error log:

11302 Received Secure RADIUS request without a cts-pac-opaque cisco-av-pair attribute

Anyone can help me on this regards.

Damien Miller — Sun, 26 May 2019 06:14:23 GMT

Can you confirm that you configured cts credentials on the switch.

Show cts credentials

Sheraz.Salim — Sun, 26 May 2019 14:58:08 GMT

IOL switch does not support the trust sec. what image you have the IOL?

unless its the AdvEnterpriseK9-M_152

syed.mahfuzur — Sun, 26 May 2019 18:37:07 GMT

Thanks for the reply, here I am using, i86bi_linux_l2-ipbasek9-ms.high_iron_aug9_2017b. Please help me on this regards.

Sheraz.Salim — Sun, 26 May 2019 19:31:04 GMT

Hi Syed,

the image you using does not support the trustsec functionality.

syed.mahfuzur — Mon, 27 May 2019 08:32:06 GMT

Hi,

Could you please tell which IOL image can work? Is below working or not:

i86bi_LinuxL2-AdvEnterpriseK9-M_152_May_2018.bin.

Thanks for your nice cooperation

Sheraz.Salim — Mon, 27 May 2019 13:27:55 GMT

yes that the one

i86bi_LinuxL2-AdvEnterpriseK9-M_152_May_2018.bin.