topic Re: ise 2.4 guest bandwidth limit control in Network Access Control

ise 2.4 guest bandwidth limit control

zeuscyril — Sun, 27 Jan 2019 07:10:11 GMT

hi all,

can you anyone confirm me is ise 2.4 will support bandwidth limit on guest users . is there any common settings can be applied in profiles or policies.

thanks

cyril

Re: ise 2.4 guest bandwidth limit control

Mohammed al Baqari — Sun, 27 Jan 2019 07:42:17 GMT

Hi,

ISE itself can't limit bandwidth for guest users but it can pass QoS
attributes to NAD devices if they support limiting guest bandwidth.

For example, for guest users connectivity to WiFi with cisco WLC, you can
pass advanced attributes to WLC from ISE by appending them to authorization
profiles

Aire-Real-Time-Bandwidth-Average-UpStream-Contract = x
Aire-Data-Bandwidth-Average-DownStream-Contract = x
Aire-Data-Bandwidth-Burst-UpStream-Contract = x
Aire-Real-Time-Bandwidth-Burst-DownStream-Contract = x
Aire-Real-Time-Bandwidth-Average-DownStream-Contract = x
Aire-Real-Time-Bandwidth-Burst-UpStream-Contract = x
Aire-Data-Bandwidth-Average-UpStream-Contract = x
Aire-Data-Bandwidth-Burst-DownStream-Contract = x

Re: ise 2.4 guest bandwidth limit control

zeuscyril — Mon, 28 Jan 2019 06:13:34 GMT

ISE itself can't limit bandwidth for guest users but it can pass QoS
attributes to NAD devices if they support limiting guest bandwidth.

it means wireless client has to support then only it works otherwise wont work.