topic Re: CISCO ISE SYNCHS WITH NTP SERVER BUT SHOWS WRONG TIME in Network Access Control

CISCO ISE SYNCHS WITH NTP SERVER BUT SHOWS WRONG TIME

davejumby — Thu, 29 Nov 2018 09:08:10 GMT

Hi

My ISE has NTP server configured , from the below output it synchronizes with the server but does not get the correct time when I output show clock

show ntp
Configured NTP Servers:
172.16.5.1

synchronised to NTP server (172.16.5.1) at stratum 9
   time correct to within 452 ms
   polling server every 64 s

     remote           refid      st t when poll reach   delay   offset jitter
==============================================================================
127.127.1.0     .LOCL.          10 l 700   64    0    0.000    0.000   0.000
*172.16.5.1      LOCAL(1)         8 u   19   64 377    0.340    5.481   3.332

* Current time source, + Candidate , x False ticker

Warning: Output results may conflict during periods of changing synchronization.

Re: CISCO ISE SYNCHS WITH NTP SERVER BUT SHOWS WRONG TIME

Mark Elsen — Thu, 29 Nov 2018 09:37:02 GMT

- Is the timezone on ISE configured correctly ?

Re: CISCO ISE SYNCHS WITH NTP SERVER BUT SHOWS WRONG TIME

Nidhi — Thu, 29 Nov 2018 09:42:04 GMT

Also, if timezone is correct, try reloading.

Re: CISCO ISE SYNCHS WITH NTP SERVER BUT SHOWS WRONG TIME

Jason Kunst — Thu, 29 Nov 2018 10:39:04 GMT

Here is an article I found

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/119371-technote-ise-00.html

Re: CISCO ISE SYNCHS WITH NTP SERVER BUT SHOWS WRONG TIME

Mannyteck — Tue, 12 Nov 2019 11:43:56 GMT

Can you send screenshot on how you configured your NTP server.