Virtual ISE with Microsoft SCOM

gacs — Fri, 16 Nov 2018 23:01:40 GMT

Hi!

This discussion and doc show how Microsoft SCOM could monitor the hardware ISE nodes:

https://community.cisco.com/t5/policy-and-access/ise-management-pack-for-system-center-operations-manager-2012/td-p/2464102

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/msft_tools/scom/scom_3-0/scom_3-0_user_guide/scom_3_0_userguide/scom_3_0_monitoring.html

Chapter: Monitoring Cisco UCS Domains with SCOM

Do we have a description for virtual ISE as well?

Thank You!

Best regards,

Gyorgy

Re: Virtual ISE with Microsoft SCOM

Nadav — Sat, 17 Nov 2018 10:42:48 GMT

Hi,

The management pack you linked is for the UCS itself. You're not monitoring ISE rather the hardware resources in use of the UCS. You could just as well monitor the UCS host on which your hypervisor is installed for virtual ISE.

Node diagnostics for the ISE deployment can be collected via syslog (UDP, TCP, Secure TCP). You can just send whatever diagnostic logging categories you want with your SCOM server as a remote logging target.

Without a management pack it's going to take some work correlating that information into actionable alarms, but the syslog is human readable.

topic Virtual ISE with Microsoft SCOM in Network Access Control

Virtual ISE with Microsoft SCOM

Re: Virtual ISE with Microsoft SCOM