topic ACS 5.x integration with Active Directory 2016 in Network Access Control

ACS 5.x integration with Active Directory 2016

Giovanni Di Venuta — Wed, 31 Oct 2018 05:39:24 GMT

Dear All, just as sanity check. Could you please confirm that there is no integration between Cisco ACS 5.x and Active Directory Windows Server 2016 ? I don't see the support in https://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-8-1/device_support/sdt581.pdf

Only Strategy is to move at ISE.

Thanks for your comments.

hslai — Wed, 31 Oct 2018 21:16:17 GMT

It might work but best to migrate to ISE as ACS 5.8.x has reached the end of SW Maintenance Releases.

Giovanni Di Venuta — Wed, 31 Oct 2018 22:27:44 GMT

Hi, could you please clarify if that is supported ? I mean integration between ACS 5.x & Active Directory 2016.

Thanks
Giovanni

yalbikaw — Wed, 31 Oct 2018 23:27:08 GMT

windows 2016 is not supported based on the document, and it will not be since the product is EOL/EOS.

now it might work i never tested it but its not supported.