topic Re: ACS 3.3 Migration in Network Access Control

ACS 3.3 Migration

Giovanni Di Venuta — Mon, 29 Oct 2018 09:27:12 GMT

Hi All, What is the best approach to migrate from ACS 3.3 to ISE ? does it make sense to migrate ACS 3.3 -> ACS 4.x and then to ACS 5.x and then to to ISE ?

Would it be better to do a new ISE installation and re-configure all the acs policies in ISE ?

Thanks in advance Giovanni

Re: ACS 3.3 Migration

ma.alsaffar — Mon, 29 Oct 2018 09:41:37 GMT

Hi,

I would prefer to go for fresh installation without using ACS Migration tool, i used it once and i did not find it useful.

Re: ACS 3.3 Migration

hslai — Mon, 29 Oct 2018 12:09:37 GMT

I agree with ma.alsaffar to go for a fresh ISE and reconfigure the policies and elements from scratch.

Re: ACS 3.3 Migration

walwar — Mon, 29 Oct 2018 13:20:48 GMT

I also agree with the fresh install. The migrate tool didn't work well for us and instead it took us double the amount of time to do the migrations, a new fresh would have been much better, but eh, sometimes you need to learn the hard way. 😉

Good luck!