https://community.cisco.com/t5/network-access-control/ise-posture-for-static-ip-using-auth-vlan/m-p/3729950#M489123 <P>Hi,</P> <P>&nbsp;</P> <P>Due to&nbsp;compliance/posture check using third party switch, Auth VLAN has been deployed and some of the endpoint is using static IP. What is the best way to predeploy AnyConnect profile for known discovery host - PSN automatically, considering Auth VLAN will require user to "change" IP upon moving from auth to production VLAN.</P> <P>&nbsp;</P> <P>Thanks</P> <P>Wing Churn</P> Mon, 22 Oct 2018 19:50:17 GMT wileong 2018-10-22T19:50:17Z https://community.cisco.com/t5/network-access-control/ise-posture-for-static-ip-using-auth-vlan/m-p/3729950#M489123 <P>Hi,</P> <P>&nbsp;</P> <P>Due to&nbsp;compliance/posture check using third party switch, Auth VLAN has been deployed and some of the endpoint is using static IP. What is the best way to predeploy AnyConnect profile for known discovery host - PSN automatically, considering Auth VLAN will require user to "change" IP upon moving from auth to production VLAN.</P> <P>&nbsp;</P> <P>Thanks</P> <P>Wing Churn</P> Mon, 22 Oct 2018 19:50:17 GMT https://community.cisco.com/t5/network-access-control/ise-posture-for-static-ip-using-auth-vlan/m-p/3729950#M489123 wileong 2018-10-22T19:50:17Z https://community.cisco.com/t5/network-access-control/ise-posture-for-static-ip-using-auth-vlan/m-p/3730144#M489145 <P>Please review info at&nbsp;<A href="https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect46/administration/guide/b_AnyConnect_Administrator_Guide_4-6/deploy-anyconnect.html#ID-1425-00000111" target="_blank">Pre-Deploying AnyConnect</A>&nbsp;in AnyConnect Admin Guide. Specific to ISE Posture is to include an ISE Posture profile with the DiscoveryHost and other fields configured accordingly.</P> Mon, 22 Oct 2018 19:53:23 GMT https://community.cisco.com/t5/network-access-control/ise-posture-for-static-ip-using-auth-vlan/m-p/3730144#M489145 hslai 2018-10-22T19:53:23Z