topic Re: Detect Unclassified Application in Network Access Control

Detect Unclassified Application

Ricardo T Duarte — Fri, 19 Oct 2018 10:06:10 GMT

Hi there,

Is it possible to create posture conditions for applications that show as unclassified?

From what I can see, it is not possible and I am unable to classify the applications manually.

Thanks,

Re: Detect Unclassified Application

Aravind Ravichandran — Fri, 19 Oct 2018 10:31:12 GMT

You can create Unclassified application posture condition under Policy->Policy elements->Posture->Application condition->Add as below.

This will category the applications which are under unclassified category, you can fetch it under Context visibility.

Thanks,

Aravind

Re: Detect Unclassified Application

Ricardo T Duarte — Fri, 19 Oct 2018 10:54:45 GMT

Hi there,

That was what I tried.

But it just shows a fixed list of "Vendors", and in this case the vendor is not there.

But the application is detected on the endpoints.

Regards

Re: Detect Unclassified Application

hslai — Wed, 24 Oct 2018 19:01:58 GMT

That is expected. The vendor is supplied by a 3rd-party that we integrated in ISE posture. If you have a TAC case open, please ask TAC to file a bug to add the specific vendor.