topic Re: Cisco ISE VM Authentication Issue in Network Access Control

Cisco ISE VM Authentication Issue

ptlbhavo — Wed, 17 Oct 2018 20:37:54 GMT

Hello,

We have ISE 2.4 installed on VM for Network Users authentication. We have created the policies for Radio Network Device and Provision Server. When the radio privilege users trying to access network device with correct credentials, it is denying access because it is not pointing to right Authorization Policy.. See below Radius Log Message Output.

Authentication Policy	Default >> Default
Authorization Policy	Default >> Basic_Authenticated_Access
Authorization Result	DenyAccess

Can anyone in the community had similar problem? Need help!

Re: Cisco ISE VM Authentication Issue

Arne Bier — Thu, 18 Oct 2018 12:25:20 GMT

It would help to share a screen shot of the Policy Set (Authentication as well as Authorization) and then also the final details pane of the Steps that ISE took. ISE is pretty clear in most cases why something failed.

Re: Cisco ISE VM Authentication Issue

ptlbhavo — Thu, 18 Oct 2018 15:48:23 GMT

Hi,

Here's how my network is.. My PC is connected to Router and also Radio device and ISE VM installed on the server is connected to the same router.

As requested I have shared my screen shots high lighting the problem area.

The problem here we are facing is.. On Device Setting page when we select all device type, it takes the default policy settings which you should see in my Radius screen shot report attached.

I send to My Cisco ISE Make a Policy Set Screen Shot in below.

Authorization PolicySequence of Policy Set for Radius AuthenticationNetwork DevicesRadius Log Report Details

Policy.Physical PC (Server)

Actually, I make Policy in Sequential(Round-Robin) Order to follow Rules but It will be Directly to Authenticated Default one..

Thanks,

Bhavin

Re: Cisco ISE VM Authentication Issue

ptlbhavo — Thu, 18 Oct 2018 15:50:26 GMT

Hi,

Here's how my network is.. My PC is connected to Router and also Radio device and ISE VM installed on the server is connected to the same router.

As requested I have shared my screen shots high lighting the problem area.

The problem here we are facing is.. On Device Setting page when we select all device type, it takes the default policy settings which you should see in my Radius screen shot report attached.

I send to My Cisco ISE Make a Policy Set Screen Shot in below.

Authorization PolicySequence of Policy Set for Radius AuthenticationNetwork DevicesRadius Log Report Details

Policy.Physical PC (Server)

Actually, I make Policy in Sequential(Round-Robin) Order to follow Rules but It will be Directly to Authenticated Default one..

Thanks,

Bhavin

Re: Cisco ISE VM Authentication Issue

Aravind Ravichandran — Thu, 18 Oct 2018 15:59:53 GMT

Hi,

Change the device type from All device type to All device type#Microwave radio#Aviation eclipes radius in network device.

As the policy sets is not matching the precise condition All device type#Microwave radio#Aviation eclipes radius which is meant for Avit eclipes radio access policy set, its hitting the default policy set.

Thanks Aravind