topic Re: ISE API in Network Access Control

ISE API

hradhanp — Thu, 18 Oct 2018 21:22:47 GMT

Hi Team,

Can we use restful external API to send an alert to external logging server for below:

1. ISE System Health

2. Extenal AD Unavailable

3. Secondary node not synchronized

4. Backup failed

5. CPU percentage

6. Memory percentage

7. TACACS+ Authentication wrong password

I need some document which I can use for API integration configuration.

Re: ISE API

Aravind Ravichandran — Fri, 19 Oct 2018 04:07:47 GMT

Hello,

Currently sending alert,through API is not possible.you can find ISE API related documents here https://ise-ip:9060/ers/sdk

Alternatively you can enable syslog/mail alerts here Administration->System->Settings->Alarm settings->Alarm configurations

Thanks,

Aravind

Re: ISE API

hradhanp — Mon, 22 Oct 2018 08:13:24 GMT

Can we poll the above information from ISE using an API ?

Re: ISE API

Nidhi — Mon, 22 Oct 2018 09:28:26 GMT

Hi Hiten,

You can configure your external logging targets in ISE and then select these targets under logging categories. so the logs will be available in the remote target as well. you do not need API for this.

if needed for specific alarms, make sure 'send syslog' option is selected for alarms.

Thanks,

Nidhi

Re: ISE API

Aravind Ravichandran — Mon, 22 Oct 2018 11:19:04 GMT

No,it's not possible.you can enable alert over mail & syslog.

-Aravind