topic Force or automatic client SSID switching in Network Access Control

Force or automatic client SSID switching

aka000000 — Mon, 11 Mar 2019 06:24:53 GMT

In ISE 2.0, does it have ability to force a authenticated guest to switch to a different and hidden SSID?

Specifically, a guest user connects to a open SSID and authenticates via CWA using their AD account or sponsor created account, then ISE force it to a hidden guest SSID automatically. Is this possible? or the user need to re-associate to the guest SSID manually?

after reading your post this

Jatin Katyal — Thu, 21 Jan 2016 19:05:12 GMT

after reading your post this is the only thing came to my mind with ISE. If you are talking about DUAL SSID wireless byod self registration the please look at the document. With DUAL SSID, user has to manually disconnect and reconnect.

http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_61_byod_provisioning.pdf

HTH

~ Jatin

ISE supports 802.1x and VLAN

Leo Laohoo — Thu, 21 Jan 2016 19:39:47 GMT

ISE supports 802.1x and VLAN Switching so, try this: Configure multiple dynamic interface (and none of them is "attached" to an SSID). On the SSID, enable "AAA Override".