topic Re: Verifying manual Switch-Switch MACSec configuration is working on 6880 in Network Access Control https://community.cisco.com/t5/network-access-control/verifying-manual-switch-switch-macsec-configuration-is-working/m-p/3505446#M493509 <HTML><HEAD></HEAD><BODY><P>Hi Gagan,</P><P></P><P>MACSec between switches does not include ISE. Please post the question in the switching community site.</P><P></P><P>Thanks</P><P>Krishnan</P></BODY></HTML> Fri, 01 Sep 2017 21:01:49 GMT kthiruve 2017-09-01T21:01:49Z Verifying manual Switch-Switch MACSec configuration is working on 6880 https://community.cisco.com/t5/network-access-control/verifying-manual-switch-switch-macsec-configuration-is-working/m-p/3505445#M493484 <HTML><HEAD></HEAD><BODY><P>Hi Team,</P><P></P><P>I need to find a way to determine if MACSec is working properly between two switches, or help understanding the output of the commands below to determine if it is working properly&nbsp; on cat 6800.</P><P></P><P>Refer me a document which shows encrypted traffic or any commands.</P><P>Thanks in Advance.</P><P></P><P>Regards</P><P>Gagan</P></BODY></HTML> Mon, 11 Mar 2019 07:58:46 GMT https://community.cisco.com/t5/network-access-control/verifying-manual-switch-switch-macsec-configuration-is-working/m-p/3505445#M493484 Gagandeep Singh 2019-03-11T07:58:46Z Re: Verifying manual Switch-Switch MACSec configuration is working on 6880 https://community.cisco.com/t5/network-access-control/verifying-manual-switch-switch-macsec-configuration-is-working/m-p/3505446#M493509 <HTML><HEAD></HEAD><BODY><P>Hi Gagan,</P><P></P><P>MACSec between switches does not include ISE. Please post the question in the switching community site.</P><P></P><P>Thanks</P><P>Krishnan</P></BODY></HTML> Fri, 01 Sep 2017 21:01:49 GMT https://community.cisco.com/t5/network-access-control/verifying-manual-switch-switch-macsec-configuration-is-working/m-p/3505446#M493509 kthiruve 2017-09-01T21:01:49Z