https://community.cisco.com/t5/network-access-control/stealth-temporal-agent-limitations-and-consideration/m-p/3696861#M494627 <P dir="ltr"><SPAN>Hi Experts,</SPAN></P> <P dir="ltr">&nbsp;</P> <P dir="ltr"><SPAN>I have a customer asks about our agentless approach, firstly I found a couple of trainings through topic and it is referred as Stealth Temporal Agent right? If yes, what are the limitations on Posture Condition and Remediation side, on admin guide of ISE and Anyconnect, I was able to find limitations on both "Temporal" and "Stealth" separately but not entirely sure if Stealth Temporal Agent has both of it combined? Do you have a documentation that explains it? On top of that customer is interested in Windows Update and AV version check.</SPAN></P> <P dir="ltr">&nbsp;</P> <P dir="ltr"><SPAN>Regards</SPAN></P> <P dir="ltr">&nbsp;</P> Wed, 29 Aug 2018 10:25:48 GMT hevyapan 2018-08-29T10:25:48Z https://community.cisco.com/t5/network-access-control/stealth-temporal-agent-limitations-and-consideration/m-p/3696861#M494627 <P dir="ltr"><SPAN>Hi Experts,</SPAN></P> <P dir="ltr">&nbsp;</P> <P dir="ltr"><SPAN>I have a customer asks about our agentless approach, firstly I found a couple of trainings through topic and it is referred as Stealth Temporal Agent right? If yes, what are the limitations on Posture Condition and Remediation side, on admin guide of ISE and Anyconnect, I was able to find limitations on both "Temporal" and "Stealth" separately but not entirely sure if Stealth Temporal Agent has both of it combined? Do you have a documentation that explains it? On top of that customer is interested in Windows Update and AV version check.</SPAN></P> <P dir="ltr">&nbsp;</P> <P dir="ltr"><SPAN>Regards</SPAN></P> <P dir="ltr">&nbsp;</P> Wed, 29 Aug 2018 10:25:48 GMT https://community.cisco.com/t5/network-access-control/stealth-temporal-agent-limitations-and-consideration/m-p/3696861#M494627 hevyapan 2018-08-29T10:25:48Z https://community.cisco.com/t5/network-access-control/stealth-temporal-agent-limitations-and-consideration/m-p/3697035#M494629 <P>Hi,<BR /><BR />Yes, it is called the Stealth Temporal Agent. It currently supports the following conditions (windows only):<BR /><BR />- AM installation<BR />- Firewall enabled<BR />- Application inventory<BR />- Hardware inventory<BR />- USB check<BR /><BR />If the customer wants to check AV status, they will need to use the Temporal, AnyConnect Stealth or AnyConnect agents.<BR /><BR />Regards,<BR />-Tim</P> Wed, 29 Aug 2018 14:35:09 GMT https://community.cisco.com/t5/network-access-control/stealth-temporal-agent-limitations-and-consideration/m-p/3697035#M494629 Timothy Abbott 2018-08-29T14:35:09Z