topic Re: Pxgrid 2.0 API - AccountCreate Authentication failing in Network Access Control

Pxgrid 2.0 API - AccountCreate Authentication failing

Michal Garcarz — Tue, 28 Aug 2018 20:31:02 GMT

Hello Team,

I wanted to use a new API to create pxgrid consumer consuming MNT session data:

https://github.com/cisco-pxgrid/pxgrid-rest-ws/wiki/pxGrid-Consumer

I do not really understand this documentation: how to authenticate.

How exactly should i construct this header:

Authorization: Basic [nodeName]:[password if password-based authentication, otherwise empty string]

What is nodeName ? How should i get the password ? Should not the password be received as a result of AccountCreate call (while this is the first step at the same time) ? Chicken and egg problem ?

When trying to use basic http auth for admin or admin_ers (those are working fine for all other ERS API calls)

I do receive:

Password auth enabled in ISE/pxgrid.

Could you please help here ?

Thanks,

Michal

UPDATE: OK, got it solved, AccountCreate role does not require authentication and the header should not be attached at all, thanks !

Re: Pxgrid 2.0 API - AccountCreate Authentication failing

hslai — Thu, 30 Aug 2018 04:28:19 GMT

Please note that the pxGrid API is totally different from ISE ERS API.

It says under the section "pxGrid account authentication",

...

Password-based authentication requires AccountCreate first to obtain a password, and then perform AccountActivate using the credentials obtained.

...

For example,

curl -X POST -k -H 'Content-Type: application/json' -H 'Accept: application/json' -i 'https://myISE:8910/pxgrid/control/AccountCreate' --data '{
"nodeName":"myTestNodeName1"
}'

Re: Pxgrid 2.0 API - AccountCreate Authentication failing

paul — Wed, 28 Nov 2018 16:36:50 GMT

I am trying to get this working for LiveAction in ISE 2.1. I am trying to do the AccountCreate function but I keep getting 401 Unauthorized error. The AccountCreate is not supposed to require authorization.

I have the following in Postman:

I am getting this back in the body of the response:

<body>
        <h1>HTTP Status 401 - Full authentication is required to access this resource</h1>
        <div class="line"></div>
        <p>
            <b>type</b> Status report
        </p>
        <p>
            <b>message</b>
            <u>Full authentication is required to access this resource</u>
        </p>
        <p>
            <b>description</b>
            <u>This request requires HTTP authentication.</u>
        </p>
        <hr class="line">
        <h3></h3>
    </body>

I have password based accounts creation enabled. What am I missing?

Re: Pxgrid 2.0 API - AccountCreate Authentication failing

Michal Garcarz — Mon, 10 Dec 2018 15:30:09 GMT

Hi Paul,

Yep, that is correct, no authentication, it looks perfectly fine, i have the same and it's working fine:

I do believe you might be using too old version of ISE (2.1) where that API was not yet really there, i remember to have some challenges in 2.3 - upgraded to 2.4 and have it working fine.

Cheers,

Michal