topic Re: ISE 2.4 Performance & Scale in Network Access Control

ISE 2.4 Performance & Scale

franklin.nascimento — Thu, 23 Aug 2018 11:15:47 GMT

Hello everyone. I am in the process of homologation of the ISE 2.4 TACACS + solution and I am in need of proof of documents for performance.
In the link:
https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148
There is documentation for version 2.1, but nothing 2.4!
Can you help me with this proof?

Thank you very much for the attention!

Re: ISE 2.4 Performance & Scale

paul — Thu, 23 Aug 2018 14:22:03 GMT

It does have 2.4 information in it just not for TACACS. It has TACACS information for the hardware platforms you use in 2.4, the 3515s and 3595s. If you are using VMs the specs should match the hardware platform so the scalability should be the same. I don't believe the TACACS numbers are any different in 2.4 then they were in 2.1, but I could be wrong. I would use that document and use the explanation I just posted. The hardware numbers are in that document.

Re: ISE 2.4 Performance & Scale

franklin.nascimento — Tue, 28 Aug 2018 18:21:43 GMT

Thanks Paul!