topic Re: ISE 2.4 Scheduled Backup not starting in Network Access Control

ISE 2.4 Scheduled Backup not starting

zshelefka — Mon, 06 Aug 2018 11:47:18 GMT

I was able to create a scheduled backup for ISE, it worked for about 2 months backing up successfully once a week. Then it just stopped backing up, the backup is not failing, just not starting at all. When I rescheduled the backup, the backups will not start either. I am new to ISE, so I am not sure where to look to solve this issue. Any help would be great. Thank you.

Re: ISE 2.4 Scheduled Backup not starting

anthonylofreso — Mon, 06 Aug 2018 11:58:54 GMT

Are you able to backup by clicking "Backup Now" on the Administration > System > Backup & Restore page?

Re: ISE 2.4 Scheduled Backup not starting

shinnie1978 — Mon, 06 Aug 2018 13:43:41 GMT

I encountered similar issues post upgrade to 2.4, we had a working scheduled backup prior to the upgrade but scheduled backups failed to run after the upgrade. We have been unable to run manual backups of the configuration from GUI or CLI but are able to backup the ops/monitoring data. Currently working with Cisco TAC to troubleshoot the issue but suspect a database lock.

Does your issue sound similar to the above.

Re: ISE 2.4 Scheduled Backup not starting

Arne Bier — Tue, 07 Aug 2018 02:47:56 GMT

I had the same thing after upgrading from 2.3 to 2.4

In my case, the GUI says "End Date = null" - and despite this bug, it still made backups for a few days and then gave up for no reason. I can still do manual config backups. TAC investigating this - no root cause found so far. The TAC quoted this bug ID: CSCvh84275

Re: ISE 2.4 Scheduled Backup not starting

Damien Miller — Tue, 07 Aug 2018 04:04:53 GMT

I have two 2.4 deployments on the go right now. The one upgraded from 2.1 to 2.4 has the same issue as Arne's. The end date is null and only manual backups run. When I try to update the date and time it appears to save, but does not, upon reloading the backup page it still lists the end date as null.

The other deployment was an upgrade from 2.3 to 2.4 and while the end date is not null, it also does not run on schedule, manual backups only.

I have yet to open a case on this due to lack of time to work on it. Maybe CSCvh84275 needs some deeper investigation because it sure sounds similar....If you don't count the whole cosmetic and still working bit.

Re: ISE 2.4 Scheduled Backup not starting

shinnie1978 — Tue, 07 Aug 2018 07:34:35 GMT

Thanks for the info will follow-up with TAC as in my case I am unable to run a manual backup, they stall at 45%, appear to restart as the progress counter is reset and then climbs to 60% and remains at this indefinitely. TAC have suggested CSCvj74490 but currently only internally visible. Will update once support bundle has been analysed by TAC.

Just to clarify are your manual backups run to the same destination as the scheduled backup?

Regards
Scott

Re: ISE 2.4 Scheduled Backup not starting

Arne Bier — Tue, 07 Aug 2018 23:59:44 GMT

Yip - we only have one repo for everything. I can view the repo in the GUI and in the CLI and I can make manual config backups in GUI and CLI.

The freaky thing is that the scheduled Operational Backups are totally working fine! No issues at all. It's just affecting the Config Data Backups.

Re: ISE 2.4 Scheduled Backup not starting

Ping Zhou — Wed, 08 Aug 2018 00:28:41 GMT

Wow, you did on-box upgrade to get to 2.4?

I did backup-restore process to move to a brand new ise appliance for 2.4, then patch 1. It’s been only about 2 weeks. So far, My scheduled weekly config data backup works. Haven’t tried manual backup yet...

Thanks.

Re: ISE 2.4 Scheduled Backup not starting

Arne Bier — Wed, 08 Aug 2018 10:58:18 GMT

Hi @Ping Zhou

If you're refrring to my earlier comment about upgrading from 2.3 to 2.4, we rebuilt all the VM's and restored the config backup onto the Primary PAN node. I have not used the official upgrade procedure since my 2.2 -> 2.3 upgrade fiasco. it went badly wrong and we ended up rebuilding all the VM's to fix the issue.

regards

Arne

Re: ISE 2.4 Scheduled Backup not starting

shinnie1978 — Thu, 30 Aug 2018 07:44:39 GMT

Please ignore earlier bug reference, case was escalated to the BU who related the issue to the ISE Indexing service not running. We found a missing reverse DNS entry (PTR record) was missing for the secondary PAN. Once in place, indexing service started and manual and scheduled backup issues were resolved.

Re: ISE 2.4 Scheduled Backup not starting

hslai — Thu, 30 Aug 2018 15:47:03 GMT

TAC subsequently opened a new bug CSCvm21147.

Re: ISE 2.4 Scheduled Backup not starting

hslai — Thu, 30 Aug 2018 15:49:54 GMT

As commented by others, different factors may contribute and make the backup not happening. In case you confirmed it still not working after reading through all the comments, please engage Cisco TAC to troubleshoot further.

Re: ISE 2.4 Scheduled Backup not starting

jaco.erasmus@za.logicalis.com — Wed, 13 Nov 2019 10:43:56 GMT

Hi,

We're experiencing a similar issue but on version 3.0.4.070. Can anyone perhaps confirm if this bug (CSCvh84275) is also on on this version?

Re: ISE 2.4 Scheduled Backup not starting

Arne Bier — Wed, 13 Nov 2019 20:09:56 GMT

Hi jaco.erasmus@za.logicalis.com

What is version 3.0.4.070? ISE 2.3 is not a great release. If I were you I'd get off that release and give 2.4 a try. Or if you're feeling enthusiastic, then 2.6

Re: ISE 2.4 Scheduled Backup not starting

viperar15 — Tue, 26 Nov 2019 13:53:35 GMT

3.0.4.070 is your ADE-OS Version.

If you do a show version, look a few more lines down for "Cisco Identity Services Engine" and the version will be just below that line.

Re: ISE 2.4 Scheduled Backup not starting

mohcine oudrhiri — Mon, 23 Mar 2020 11:32:19 GMT

hello

i had this problem too , but it was a just a bad configuration of the schedule backup .

for cisco ISE when you put daily schedule backup you have to put start date and fin date to this , it seem not logic but this is the case especially if you don't have any error log about backup.

thank you