topic Netflow Profiling in Network Access Control

Netflow Profiling

smano — Thu, 02 Aug 2018 04:48:03 GMT

Hello Everyone

I am testing netflow profiling for the first time. Using ISE 2.3, switch 3750 and a test endpoint generares netflow traffic. Have enabled netflow probe in ISE, flow record, export and monitor configs are in switch, Profiling Endpoint attribute filter is disabled. Checked that the Switch is exporting some netflow traffic to ise, but ISE context visibilty doesnt show any netflow attribute to create a profiling policy.

Obviously, we can use different probe to create a profile. But netflow is in the use case and need to show its working. Can anyone explain how to make netflow profiling work?

Thanks, in advance

Re: Netflow Profiling

Rob Ingram — Thu, 02 Aug 2018 08:43:52 GMT

Hi,

This doc provides information on how to configure all the probes and might provide some useful guidance.

HTH

Re: Netflow Profiling

poornakumar — Thu, 19 Jun 2025 11:02:28 GMT

Hi Rob,

Not able to view this document,access is restricted for this document

Re: Netflow Profiling

Rob Ingram — Thu, 19 Jun 2025 11:12:16 GMT

@poornakumar that looks like a very old document, this is the latest up to date ISE profiling guide. https://community.cisco.com/t5/security-knowledge-base/ise-profiling-design-guide/ta-p/3739456