topic Determining ISE Plus Licenses Needed in Network Access Control

Determining ISE Plus Licenses Needed

RICHARD MASSELLE — Thu, 26 Jul 2018 14:18:23 GMT

We have multiple site ISE 2.2 environment and are adding 2 new sites. Our current ISE License is;

50000 Base

3500 Plus.

I am trying to find a way to determine how many new plus licenses we may need. In the past we have temporarily gone over the 3500 plus license count to about 5000. One of the problems in determining this is these are colleges and this is very slow time.

Is there some sort of algorithm or tool I can use to determine? I would rather not shoot from the hip if possible.

Re: Determining ISE Plus Licenses Needed

hslai — Thu, 26 Jul 2018 20:24:15 GMT

Please review the Cisco ISE ordering guide , which details which features use PLUS licenses, how consumption works and enforced (in Section 4).

Re: Determining ISE Plus Licenses Needed

RICHARD MASSELLE — Fri, 27 Jul 2018 11:32:25 GMT

Thanks for your reply. I have reviewed this guide and although it is a good explanation of which features use plus licenses e.g. profiling and how consumption works ( active session) it does not give me a measurement of dynamic active sessions. I suppose I could judge by past usage and device count an expected additional future licenses needed with added colleges coming online.

Re: Determining ISE Plus Licenses Needed

hslai — Sat, 28 Jul 2018 01:09:39 GMT

If using traditional licensing and if the recent usage within last 2 months, you may take a look at the usage over time bar charts at Administration > System > Licensing > License Usage > Usage Over Time.