topic Re: System Name via ISE API in Network Access Control https://community.cisco.com/t5/network-access-control/system-name-via-ise-api/m-p/3451220#M496622 <HTML><HEAD></HEAD><BODY><P>It has never been a feature for endpoint ers api, please use ISE Context Visibility or ISE admin CLI option to get all endpoints or use the ISE EAT tool.</P></BODY></HTML> Thu, 28 Jun 2018 18:18:37 GMT Jason Kunst 2018-06-28T18:18:37Z System Name via ISE API https://community.cisco.com/t5/network-access-control/system-name-via-ise-api/m-p/3451219#M496621 <HTML><HEAD></HEAD><BODY><P>Hello ISE community,</P><P></P><P>I have a question that is similar to an old discussion that I posted, <A _jive_internal="true" href="https://community.cisco.com/thread/92325">System name in ISE Reports</A>.</P><P></P><P>I know that there is no way to get the endpoint's system name (hostname) via ISE reports and I have submitted a feature request for the hostname to be included in the reports.</P><P></P><P>My question is as follows: would it be possible to get the endpoint hostnames via the ISE API? The endpoints that we are interested in getting system names from are all going through posture checks using AnyConnect.</P><P></P><P>Thank you!</P></BODY></HTML> Thu, 28 Jun 2018 17:24:35 GMT https://community.cisco.com/t5/network-access-control/system-name-via-ise-api/m-p/3451219#M496621 rwehe 2018-06-28T17:24:35Z Re: System Name via ISE API https://community.cisco.com/t5/network-access-control/system-name-via-ise-api/m-p/3451220#M496622 <HTML><HEAD></HEAD><BODY><P>It has never been a feature for endpoint ers api, please use ISE Context Visibility or ISE admin CLI option to get all endpoints or use the ISE EAT tool.</P></BODY></HTML> Thu, 28 Jun 2018 18:18:37 GMT https://community.cisco.com/t5/network-access-control/system-name-via-ise-api/m-p/3451220#M496622 Jason Kunst 2018-06-28T18:18:37Z