ISE password CLI overwrite

Kn1ghtR1d3rOfD00m — Fri, 21 Feb 2020 19:06:05 GMT

Hi ISEer guys

I know that this is a bit odd, I have searched for this topic and they say: "You can only recover the cli password after rebooting the ise node from install DVD. There is no other method."

Its fine, but I can login to the ISE via CLI, in fact I have 7 nodes, but they have different password, so I want to standardize them

is it possible to overwrite the same admin password via CLI?

For example:

ise/admin# conf t

ise/admin(config)# username admin password plain my_new_pass role admin

will that work?

will that overwrite my existing admin password?

Re: ISE password CLI overwrite

Surendra — Sun, 26 May 2019 04:33:24 GMT

Yes it does. Make sure to copy the running-configuration to startup-configuration once done.

Re: ISE password CLI overwrite

Kn1ghtR1d3rOfD00m — Sun, 02 Jun 2019 07:38:47 GMT

Thank you so much!! rated 🙂

topic Re: ISE password CLI overwrite in Network Access Control

ISE password CLI overwrite

Re: ISE password CLI overwrite

Re: ISE password CLI overwrite