topic Re: Auto Trunk Config Via ISE in Network Access Control https://community.cisco.com/t5/network-access-control/auto-trunk-config-via-ise/m-p/3429803#M498823 <HTML><HEAD></HEAD><BODY><P>I would try NEAT with Interface Template as described in this guide.</P><P><A href="https://community.cisco.com/docs/DOC-77476">NEAT with Interface Template</A></P><P></P><P>- Krish</P></BODY></HTML> Mon, 16 Jul 2018 17:22:00 GMT kvenkata1 2018-07-16T17:22:00Z Auto Trunk Config Via ISE https://community.cisco.com/t5/network-access-control/auto-trunk-config-via-ise/m-p/3429801#M498821 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Looking for some information on how to configure ISE to automatically change access ports to trunk ports on our switches, based on a list of certain MAC Addresses. So for example, we have a set of Meraki MR233 APs, and we would like to just plug these into the switch, the MAC address is matced with a group in ISE, and the port auto changes to trunk.</P><P>Im not sure what this feature is called or if its possible, but any help would be appreciated. Thanks.</P></BODY></HTML> Mon, 16 Jul 2018 14:43:33 GMT https://community.cisco.com/t5/network-access-control/auto-trunk-config-via-ise/m-p/3429801#M498821 anthony.salmon 2018-07-16T14:43:33Z Re: Auto Trunk Config Via ISE https://community.cisco.com/t5/network-access-control/auto-trunk-config-via-ise/m-p/3429802#M498822 <HTML><HEAD></HEAD><BODY><P>Few options:</P><UL><LI>Enable NEAT under common tasks for RADIUS Authorization</LI><LI>Config Cisco-Av-Pair under Advanced Settings: cisco-av-pair=device-traffic-class=switch</LI><LI>Interface/Service templates</LI><LI>EEM</LI></UL><P></P><P>I would start with NEAT option and check results.</P></BODY></HTML> Mon, 16 Jul 2018 16:35:15 GMT https://community.cisco.com/t5/network-access-control/auto-trunk-config-via-ise/m-p/3429802#M498822 Craig Hyps 2018-07-16T16:35:15Z Re: Auto Trunk Config Via ISE https://community.cisco.com/t5/network-access-control/auto-trunk-config-via-ise/m-p/3429803#M498823 <HTML><HEAD></HEAD><BODY><P>I would try NEAT with Interface Template as described in this guide.</P><P><A href="https://community.cisco.com/docs/DOC-77476">NEAT with Interface Template</A></P><P></P><P>- Krish</P></BODY></HTML> Mon, 16 Jul 2018 17:22:00 GMT https://community.cisco.com/t5/network-access-control/auto-trunk-config-via-ise/m-p/3429803#M498823 kvenkata1 2018-07-16T17:22:00Z