topic Re: ACS 5.8 to ISE 2.4 Migration in Network Access Control

ACS 5.8 to ISE 2.4 Migration

aklyuchk — Thu, 19 Apr 2018 17:12:28 GMT

I am reading through ACS to ISE migration guide 2.4:
User Guide for Cisco Secure ACS to Cisco ISE Migration Tool, Release 2.4 - Preface [Cisco Identity Services Engine] - C…
And see this "This guide describes the process for migrating data from a Cisco Secure Access Control Server (ACS) , Release 5.5 or 5.6 to Cisco Identity Services Engine (ISE)" (and actually this wording is used everywhere in the guide). Previously, in the 2.3 guide we had "...Release 4.2 and 5.5 or later…".
Does that mean that we do not support any ACS versions other than 5.5, 5.6 with ISE 2.4 or that text is misleading and i should assume that it is "5.5 or later"?

Re: ACS 5.8 to ISE 2.4 Migration

thomas — Thu, 19 Apr 2018 22:25:24 GMT

You are correct, this appears to be wrong.

Forwarded to our Docs team for corrections and we'll get the document reposted.

Thank you for pointing this out to us!

Re: ACS 5.8 to ISE 2.4 Migration

aklyuchk — Thu, 19 Apr 2018 22:34:15 GMT

Good to know - thanks for confirming!

Re: ACS 5.8 to ISE 2.4 Migration

vin4510596 — Wed, 08 Aug 2018 14:53:34 GMT

Hi, Where do I find the ACS to ISE Migration 2.4 download? I can't find it on the Cisco support. Suggestion?

Thanks,

Vincent

Re: ACS 5.8 to ISE 2.4 Migration

Damien Miller — Wed, 08 Aug 2018 23:35:00 GMT

Vincent, you can find it on the ise 2.4 download page, fourth one down.

https://software.cisco.com/download/home/283801620/type/283802505/release/2.4.0