Cisco ISE

ptlbhavo — Fri, 14 Sep 2018 18:35:56 GMT

Hi,

I am planning to implement Cisco ISE in my network environment. we must use for high availability solution for two small Cisco ISE VM nodes .

Question : -

1. If we are use latest ISE 2.4 SNS -3415-VM_K9 for TACACS+ authentication network devices(Router, switch) in (HA) environment then How many Cisco device Admin (TACACS+) License we need to buy ?

2. In case, use ISE 2.3 SNS -3415-VM_K9 for TACACS+ authentication network devices(Router, switch) in (HA) environment then How many Cisco device Admin (TACACS+) License we need to buy ?

& Be later upgrade to ISE 2.4 then we need require SWSS (Software Technical Support ) or not ?

Thanks,

Bhavin

Re: Cisco ISE

paul — Fri, 14 Sep 2018 18:49:48 GMT

First off you should be using the 3515 builds for your VMs (or 3595s). If you are running 2.4 you will need two device admin licenses. If you are running 2.3 you need one device admin license. You can upgrade from 2.3 to 2.4, but you should have the support contract to do so.

topic Re: Cisco ISE in Network Access Control

Cisco ISE

Re: Cisco ISE