User Privileges with Radius

rajeshp20 — Wed, 04 Jul 2018 13:35:18 GMT

Hi,

Client has CPE managed devices. Wireless CPE Devices used are Radwin, Cambium to name a few.

Requirement is the NOC User should have Read or Read-Write access to these devices from GUI perspective. Currently client is using open source radius server where the user attributes are defined, the access privileges - read/read write is defined in radius server.

Can we assign the read or read /write privileges for NOC users in ISE?

Please note these devices does not support TACACS. Current ISE version used is 2.3.

Regards

Rajesh

Re: User Privileges with Radius

hslai — Thu, 05 Jul 2018 02:02:18 GMT

This depends on how the privileges are defined in the existing RADIUS server but most likely the configurations can be migrated over to ISE.

There are a few guides on the net showing how to use the RADIUS services in ISE for device admin. For example,

Cisco CLI access using Radius and ISE
Integration of Firepower System with ISE for RADIUS User Authentication

topic Re: User Privileges with Radius in Network Access Control

User Privileges with Radius

Re: User Privileges with Radius