topic Re: Filter on ip address can't be done with specific IP and only IPv4 or 6 in Network Access Control

Filter on ip address can't be done with specific IP and only IPv4 or 6

michael Helmbo — Fri, 15 Jun 2018 04:00:59 GMT

It seems like filtering the TACACS live log has lost its functionality of searching on specific IP and now only support searches for either IPv4 or v6.

Can anyone please fix this issue for us customers that multiple thousands devices and don't enter them as individual NAD's but subnets(site's) instead.

Thanks

Re: Filter on ip address can't be done with specific IP and only IPv4 or 6

Nidhi — Fri, 15 Jun 2018 13:37:41 GMT

Please reach out to the account team to work with PMs to include this capability .

Thanks,

Nidhi

Re: Filter on ip address can't be done with specific IP and only IPv4 or 6

Damien Miller — Sun, 17 Jun 2018 21:12:36 GMT

When I read over this a few days ago I thought you must be missing something, I just realized how wrong I was. The ACS to ISE migrations I have done all used name-ip 1:1 mappings so it has not been an issue for me.

That certainly isn't very helpful in your case. Seems like a useful enhancement.

Re: Filter on ip address can't be done with specific IP and only IPv4 or 6

michael Helmbo — Mon, 18 Jun 2018 05:27:16 GMT

Thanks for the replies.

How does one reach out to the account team?

Re: Filter on ip address can't be done with specific IP and only IPv4 or 6

ldanny — Mon, 18 Jun 2018 08:06:57 GMT

Please open a case with TAC .

Re: Filter on ip address can't be done with specific IP and only IPv4 or 6

Jason Kunst — Mon, 18 Jun 2018 12:45:11 GMT

For feature request you would reach out to your local partner and or Cisco sales teams to capture that information

You can also send feedback directly from ISE under the menu options in upper right