topic Re: Import User with comma in the password in Network Access Control https://community.cisco.com/t5/network-access-control/import-user-with-comma-in-the-password/m-p/3436207#M509020 <HTML><HEAD></HEAD><BODY><P>If you are importing it from a CSV file, then the passwords can be enclosed in double quotes. Attached is a sample CSV file for ISE 2.4.</P></BODY></HTML> Sat, 16 Jun 2018 19:53:29 GMT hslai 2018-06-16T19:53:29Z Import User with comma in the password https://community.cisco.com/t5/network-access-control/import-user-with-comma-in-the-password/m-p/3436206#M509018 <HTML><HEAD></HEAD><BODY><P>Hi Community</P><P></P><P>As part of a migration from ACS to ISE I should import User informations into the ISE.</P><P>The problem is that the user password has commas... and comma is the delimiter for the import file.</P><P></P><P>Is there a way to get this solved except the solution to change the password?</P></BODY></HTML> Thu, 14 Jun 2018 08:01:36 GMT https://community.cisco.com/t5/network-access-control/import-user-with-comma-in-the-password/m-p/3436206#M509018 markus.forrer 2018-06-14T08:01:36Z Re: Import User with comma in the password https://community.cisco.com/t5/network-access-control/import-user-with-comma-in-the-password/m-p/3436207#M509020 <HTML><HEAD></HEAD><BODY><P>If you are importing it from a CSV file, then the passwords can be enclosed in double quotes. Attached is a sample CSV file for ISE 2.4.</P></BODY></HTML> Sat, 16 Jun 2018 19:53:29 GMT https://community.cisco.com/t5/network-access-control/import-user-with-comma-in-the-password/m-p/3436207#M509020 hslai 2018-06-16T19:53:29Z