topic Re: Data Used in Network Access Control https://community.cisco.com/t5/network-access-control/data-used/m-p/3605380#M509762 <HTML><HEAD></HEAD><BODY><P>I would install the URT tool and let it tell you exactly how long each node will take to upgrade.&nbsp; You can download the URT from the ISE download page.</P></BODY></HTML> Mon, 21 May 2018 21:53:06 GMT Arne Bier 2018-05-21T21:53:06Z Data Used https://community.cisco.com/t5/network-access-control/data-used/m-p/3605379#M509760 <HTML><HEAD></HEAD><BODY><P>I am upgrading an ISE server from 2.1 to 2.4 and the documentation says it will take 4 hours plus 1 hour per 1.5GB of data.&nbsp; How do I find out how much data a server has?</P></BODY></HTML> Mon, 21 May 2018 21:01:19 GMT https://community.cisco.com/t5/network-access-control/data-used/m-p/3605379#M509760 Doyle Mathews 2018-05-21T21:01:19Z Re: Data Used https://community.cisco.com/t5/network-access-control/data-used/m-p/3605380#M509762 <HTML><HEAD></HEAD><BODY><P>I would install the URT tool and let it tell you exactly how long each node will take to upgrade.&nbsp; You can download the URT from the ISE download page.</P></BODY></HTML> Mon, 21 May 2018 21:53:06 GMT https://community.cisco.com/t5/network-access-control/data-used/m-p/3605380#M509762 Arne Bier 2018-05-21T21:53:06Z