topic Re: ISE wireless user auto-login after self-registration in Network Access Control

ISE wireless user auto-login after self-registration

lulironi — Mon, 14 May 2018 16:59:41 GMT

Hello,

I would like to know if and how it would be possible to make a ISE wireless user auto-login to the guest wifi service after self-registering.

Use-case is to avoid user inserting cumbersome credentials (username/password) after registration.

A plus could be having the device authenticated for a configurable time (such as 8 hours), then requesting the user/password authentication.

Thank you,

Luca

Re: ISE wireless user auto-login after self-registration

Jason Kunst — Mon, 14 May 2018 17:04:12 GMT

Under the self-registration portal – registration success page please select the option to allow the user to login. This will remove the requirement for the user to enter their credentials for the initial login.

You can also use the remember me flow mentioned in the guest how-to guide to allow device to be remembered for minimum of 1 day. There is no way to do this based on hours.

https://communities.cisco.com/docs/DOC-77590

Re: ISE wireless user auto-login after self-registration

lulironi — Thu, 21 Jan 2021 15:57:51 GMT

Thank you

Re: ISE wireless user auto-login after self-registration

bgajadar — Thu, 28 Jun 2018 00:10:50 GMT

Would this guest auto login feature also work for "guest self-registration one-click sponsor approval"?

Re: ISE wireless user auto-login after self-registration

Jason Kunst — Thu, 28 Jun 2018 00:17:39 GMT

No it does not. This has came up several times this week by a few teams. Please reach out to the guest pm Ameet Kulkarni