topic AAA authentication Radius-Server in Network Access Control https://community.cisco.com/t5/network-access-control/aaa-authentication-radius-server/m-p/1991775#M510 <HTML><HEAD></HEAD><BODY><P>This is a duplicate post. Please refer to <A _jive_internal="true" href="https://community.cisco.com/message/3715102#3715102">https://supportforums.cisco.com/message/3715102#3715102</A></P></BODY></HTML> Thu, 23 Aug 2012 07:01:04 GMT Ramraj Sivagnanam Sivajanam 2012-08-23T07:01:04Z AAA authentication Radius-Server https://community.cisco.com/t5/network-access-control/aaa-authentication-radius-server/m-p/1991774#M495 <P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Hello cisco folks, </P><P></P><P>Have a technical question I would like to ask. I'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it drops me on the enable prompt. Right now I have to type &gt;en.</P><P>Then the enable password.&nbsp; Thanks in advance.</P><P></P><P>Paul </P> Fri, 21 Feb 2020 18:27:39 GMT https://community.cisco.com/t5/network-access-control/aaa-authentication-radius-server/m-p/1991774#M495 Paul Gutierrez III 2020-02-21T18:27:39Z AAA authentication Radius-Server https://community.cisco.com/t5/network-access-control/aaa-authentication-radius-server/m-p/1991775#M510 <HTML><HEAD></HEAD><BODY><P>This is a duplicate post. Please refer to <A _jive_internal="true" href="https://community.cisco.com/message/3715102#3715102">https://supportforums.cisco.com/message/3715102#3715102</A></P></BODY></HTML> Thu, 23 Aug 2012 07:01:04 GMT https://community.cisco.com/t5/network-access-control/aaa-authentication-radius-server/m-p/1991775#M510 Ramraj Sivagnanam Sivajanam 2012-08-23T07:01:04Z