topic Re: CRUD on Authorization Rules via REST API in Network Access Control https://community.cisco.com/t5/network-access-control/crud-on-authorization-rules-via-rest-api/m-p/3511661#M510850 <HTML><HEAD></HEAD><BODY><P>Unfortunately not yet. ISE 2.4 brings in T+ elements but not the policy rules. Please discuss your use case with our PM team.</P></BODY></HTML> Wed, 11 Apr 2018 16:57:46 GMT hslai 2018-04-11T16:57:46Z CRUD on Authorization Rules via REST API https://community.cisco.com/t5/network-access-control/crud-on-authorization-rules-via-rest-api/m-p/3511660#M510849 <HTML><HEAD></HEAD><BODY><P>Hi all,</P><P></P><P>is there a way to create/read/update/delete authorization rules via REST API? I did not see anything in ISE 2.3, not sure if anyhting has been added in ISE 2.4 in that regard.</P><P></P><P>Customer is explicitly asking for REST-API for Tacacs+ authorization rules.</P><P></P><P>Thanks in advance.</P><P>Roland</P></BODY></HTML> Wed, 11 Apr 2018 14:45:59 GMT https://community.cisco.com/t5/network-access-control/crud-on-authorization-rules-via-rest-api/m-p/3511660#M510849 rmueller@cisco.com 2018-04-11T14:45:59Z Re: CRUD on Authorization Rules via REST API https://community.cisco.com/t5/network-access-control/crud-on-authorization-rules-via-rest-api/m-p/3511661#M510850 <HTML><HEAD></HEAD><BODY><P>Unfortunately not yet. ISE 2.4 brings in T+ elements but not the policy rules. Please discuss your use case with our PM team.</P></BODY></HTML> Wed, 11 Apr 2018 16:57:46 GMT https://community.cisco.com/t5/network-access-control/crud-on-authorization-rules-via-rest-api/m-p/3511661#M510850 hslai 2018-04-11T16:57:46Z