topic Re: NEAT and Native VLAN Setup in Network Access Control https://community.cisco.com/t5/network-access-control/neat-and-native-vlan-setup/m-p/3592282#M511584 <HTML><HEAD></HEAD><BODY><P>Hi Hari, </P><P></P><P>Thank you for the response. </P><P></P><P>It was a doc which I never came across. That really did help me out. </P><P></P><P>Regards </P><P>Nazeeh</P></BODY></HTML> Thu, 03 May 2018 08:41:09 GMT mnazeeh 2018-05-03T08:41:09Z NEAT and Native VLAN Setup https://community.cisco.com/t5/network-access-control/neat-and-native-vlan-setup/m-p/3592280#M511582 <HTML><HEAD></HEAD><BODY><P>Hi Team,&nbsp; </P><PRE class="hist-break-word con-NoMargin"></PRE><PRE class="hist-break-word con-NoMargin">Good day!&nbsp; </PRE><PRE class="hist-break-word con-NoMargin"></PRE><PRE class="hist-break-word con-NoMargin">This would be a generic question regarding a NEAT setup in the customer's environment. So as per the customer's requirement, </PRE><PRE class="hist-break-word con-NoMargin">they would like to push a Native VLAN to the Trunk port on the Authenticator Switch. This is required as there is a Native VLAN </PRE><PRE class="hist-break-word con-NoMargin">mismatch between the Supplicant and Authenticator Switch, which doesn't let the traffic through.&nbsp; From what I understood in trying </PRE><PRE class="hist-break-word con-NoMargin">to set it up, I couldn't find any relevant document/article which said a Native VLAN could be pushed from ISE, but however would </PRE><PRE class="hist-break-word con-NoMargin">like to confirm on the same.&nbsp; Any inputs or advices on the same would be very helpful.&nbsp; </PRE><PRE class="hist-break-word con-NoMargin"></PRE><PRE class="hist-break-word con-NoMargin">Thank you! </PRE><PRE class="hist-break-word con-NoMargin"></PRE><PRE class="hist-break-word con-NoMargin">Regards </PRE><PRE class="hist-break-word con-NoMargin">Mohammed Nazeeh</PRE></BODY></HTML> Wed, 14 Mar 2018 08:55:55 GMT https://community.cisco.com/t5/network-access-control/neat-and-native-vlan-setup/m-p/3592280#M511582 mnazeeh 2018-03-14T08:55:55Z Re: NEAT and Native VLAN Setup https://community.cisco.com/t5/network-access-control/neat-and-native-vlan-setup/m-p/3592281#M511583 <HTML><HEAD></HEAD><BODY><P>Hi Mohammed, </P><P></P><P>Try this: </P><P><A href="https://community.cisco.com/docs/DOC-77476">NEAT with Interface Template</A></P><P></P><P>Cheers!</P><P>-Hari</P></BODY></HTML> Thu, 15 Mar 2018 23:12:13 GMT https://community.cisco.com/t5/network-access-control/neat-and-native-vlan-setup/m-p/3592281#M511583 hariholla 2018-03-15T23:12:13Z Re: NEAT and Native VLAN Setup https://community.cisco.com/t5/network-access-control/neat-and-native-vlan-setup/m-p/3592282#M511584 <HTML><HEAD></HEAD><BODY><P>Hi Hari, </P><P></P><P>Thank you for the response. </P><P></P><P>It was a doc which I never came across. That really did help me out. </P><P></P><P>Regards </P><P>Nazeeh</P></BODY></HTML> Thu, 03 May 2018 08:41:09 GMT https://community.cisco.com/t5/network-access-control/neat-and-native-vlan-setup/m-p/3592282#M511584 mnazeeh 2018-05-03T08:41:09Z